Views: 0 Author: Kevin Publish Time: 2026-01-23 Origin: Jinan Chensheng Medical Technology Co., Ltd.
In medical environments, reliability is not a luxury; it is a requirement. While some consumables are designed for single-use disposal, many applications—such as peristaltic pumps in dialysis machines, ventilator circuits, and industrial pharmaceutical processing—demand medical silicone tubing that can perform flawlessly over weeks, months, or even years.
For equipment managers and clinical engineers, "long-term use" presents a specific set of challenges: mechanical fatigue, chemical degradation, and material aging.
Choosing the wrong tubing for these applications leads to frequent downtime, increased maintenance costs, and potential safety hazards. This guide outlines the engineering properties you must prioritize for longevity.
To select the best product, you must first understand the enemy. Over extended periods, medical tubing faces three primary threats:
Hysteresis (Memory Loss): In pumps, tubing is compressed thousands of times an hour. Poor quality tubing eventually fails to "bounce back" to its original round shape, causing flow rates to drop.
Environmental Stress Cracking: Constant exposure to cleaning agents (bleach, alcohol) or high temperatures can cause micro-cracks in the tubing wall.
Spallation: As the tube degrades, microscopic particles can shed from the inner wall into the fluid stream—a critical risk in IV delivery.
If your goal is longevity, standard "off-the-shelf" tubing is often insufficient. Here are the specifications to look for:
For long-term applications, Platinum Cured Silicone is far superior to Peroxide Cured options.
Why: Platinum curing creates a tighter, more uniform cross-linked molecular structure.
The Result: It offers significantly higher tear strength, better clarity, and does not yellow over time. It is chemically inert, meaning it resists interaction with fluids over long durations.
Thicker Walls: For tubing that will be bent or compressed repeatedly, a thicker wall provides better structural integrity and kink resistance.
Optimized Hardness: For dynamic applications (like pumps), a hardness of 50 to 60 Shore A usually offers the best balance between flexibility and endurance.
Long-term use implies repeated cleaning.
Ensure the Medical Silicone Tubing you select is compatible with your facility's sterilization protocols (Autoclave, EtO, or Gamma) and daily disinfectants. High-grade silicone generally resists oxidation and chemical attack better than latex or PVC.
Even the best medical device silicone tubing needs proper care. Implementing these best practices will extend the service life of your components:
Rotate the Tubing: In peristaltic pumps, move the tubing slightly every 12-24 hours so the rollers do not compress the exact same spot continuously. This simple step can double the tube's life.
Relieve Tension: Ensure the tubing is not installed under excessive tension (stretched tight). Tension accelerates stress cracking.
Visual Inspection: Establish a protocol to check for "cloudiness" or "crazing" (fine cracks). These are early warning signs that the silicone structure is breaking down and replacement is imminent.
Do not wait for a leak to replace tubing.
For Pumps: Manufacturers typically rate tubing in "hours of pump life" (e.g., 500 hours). Always replace at 80% of the rated life to ensure a safety margin.
For Static Lines: Replace if the tubing becomes discolored (yellowing), stiff, or sticky.
Choosing the right tubing for long-term use is an exercise in "Total Cost of Ownership." A slightly cheaper tube that fails halfway through a procedure costs far more in downtime and risk than a premium, durable component.
At JNGXJ, our engineering team specializes in high-endurance formulations. Whether you need fatigue-resistant pump tubing or chemically inert transfer lines, explore our Medical Silicone Tubing Product List to find a solution built to last.
Q: How long does medical silicone tubing last?
A: It depends on the application. In static use (fluid transfer), high-quality platinum cured silicone can last years. In high-stress dynamic use (like pumps), lifespan is measured in hours (typically 500 to 1000+ hours depending on speed and pressure).
Q: Why does my silicone tubing turn yellow?
A: Yellowing is often a sign of using Peroxide Cured silicone, which degrades over time or when exposed to heat. Switching to Platinum Cured Silicone usually solves this problem as it remains clear.
Q: Can I use standard silicone for long-term implants?
A: No. Long-term implantation (over 29 days) requires specific "Implant Grade" silicone that has undergone rigorous biocompatibility testing (ISO 10993). Standard medical grade is typically for external or short-term internal use.
Q: Does temperature affect the lifespan of the tubing?
A: Yes, but silicone is very resilient. It maintains its properties from -50°C to +200°C. However, operating continuously at the extreme upper limits will accelerate aging.
